The UHDD-200 tablet de-duster removes excess powder from tablets after pressing. A good quality tablet de-dusting solution is key part of equipment for any production line where substantial numbers of tablets are being produced. The UHDD-200 was specifically designed to integrate seamlessly with almost any rotary tablet press. The UHDD-200 was specifically designed to integrate seamlessly into almost any rotary tablet press, with the de-dusted tablets exiting via a shoot at the top allowing the tablets to travel to a packaging solution.
By using compressed air and a carefully engineered agitation mechanism, the UHDD-200 Tablet De-duster loosens dust from the tablets’ surface as they pass through the machine, while keeping the tablets intact and undamaged.
Offering extremely broad compatibility and very high levels of effectiveness, the UHDD-200 Tablet De-Duster can process half a million tablets an hour. Featuring an efficient agitation mechanism that removes powder without harming the tablet surface, this GMP compliant design combines reliability, easy maintenance and simple cleaning. Its adjustable speed makes it suitable for use with a wide variety of tablets.
A tablet de-duster is a necessity in any large scale production line. Simply set it up so that the tablets from your tablet press dispense into the top of the de-duster, and you get perfectly clean, dust-free tablets pouring out of the bottom of the machine at an impressive rate.
As the UHDD-200 Tablet De-Duster rotates on wheels, it is easy to install, and once it’s up and running it is low-maintenance providing it is cleaned properly.
A very simple machine to set up and operate, the UHDD-200 tablet de-duster integrates easily into a tablet production line with any of our rotary tablet presses and does a superb job of cleaning off dust residue, leaving pristine tablets that move through your production facility much more easily.
| Specification | UHDD-200 |
|---|---|
| Production Capacity (Tablets/Hour) | 1,000,000 (8 mm ø) |
| Tablet Diameter (mm) | 3 mm ø -25 mm ø |
| Track (m) | 6 |
| Compressed Air (m3/h) | 0.1 (0.05 MPa) |
| Vacuum Cleaning (m3/h) | 2.7 (-1 MPa) |
| Dimensions (mm) | 500 x 550 x 1350 |
| Weight (kg) | 70 |
| Noise (dB) | < 75 |
| Power USA | 110v , single phase, 0.15 kW, 60 Hz |
| Power UK | 240v, single phase, 0.15 kW, 50 Hz |
